| |
Engine Studies: Reports and Papers
Extended Jet Engine Enterprise Scenario
Life Cycle Modelling within the Virtual Engine Enterprise
- Generic European Life Cycle Cost Nomenclature and Structure
Executive Summary - pdf (8Kb)
Full Document - pdf (116Kb)
- Definition of a Virtual Test Business Scenario for Life Cycle Cost Simulation in line with Acare
Executive Summary - pdf (8Kb)
Full Document - pdf (132Kb)
- Description of the Agreed Detailed Next Level of LCC Nomenclature and Structure
Executive Summary - pdf (8Kb)
Full Document - pdf (116Kb)
- Forum 1 Presentations:
Life-Cycle Cost Modelling - pdf (400Kb)
- Forum 2 Presentations and Demonstrations
Act 2 Scene 1
The 7 day proposal supported by Knowledge Management in the 7 day proposal
process and by Life Cycle Cost Modelling
Whole Engine Development
European Cycle Program
Supply Chain Manufacturing Workflow Simulation
Conference and Journal Articles
- Data-Driven Simulation of the Extended Enterprise
(18th International Conference on production Reseach 2005)
by B. Cao, R. Farr, M. Byrne and J Tannock
Full Document -
pdf (713Kb)
- Development of a Turbofan Performance Model using a Generic Simulation Tool
(ASME Turbo Expo 2005)
http://store.asme.org/product.asp?catalog%5Fname=Conference+Papers&category%5Fname=Aircraft+Engine%3A+General%5FGT2005&product%5Fid=GT2005%2D68678
by A. Alexiou and K. Mathioudakis
see also http://www.ltt.ntua.gr/papers/gt-2005-68678-pre.pdf
- Scenario Planning in the Aerospace Business Environment - The VIBES Approach
(ICE 2005)
by R.Farr, J. Bramham, M. Er and B. MacCarthy
Full Document
- pdf (907Kb)
- Automatic Mixed Dimensional Finite Element Modelling of Sketch Based CAD
Components
(ACME 2005)
by T. T. Robinson, C. G. Armstrong, K. Y. Lee and H. Ou
Full Document
- pdf (684Kb)
- Gas Turbine Engine Performance Model Applications using an Object-Oriented
Simulation Tool.
(ASME Turbo Expo 2006)
http://store.asme.org/product.asp?catalog%5Fname=Conference+Papers&category%5Fname=Aircraft+Engine%5FGT2006&product%5Fid=GT2006%2D90339
by A. Alexiou and K. Mathioudakis
see also http://www.ltt.ntua.gr/papers/GT2006-90339-pre.pps
- Multi-objective Evolutionary Algorithms Applied to Aircraft Engine
(ICAS 2006)
by R. Filomeno Coelho, S. Pierret, P. Cobas
Full
Document - pdf (684Kb)
- The Aero-engine Value Chain under Future Business Environments: using Agent-based
Simulation to Understand Dynamic behaviour
(MITIP 2006)
by D. Buxton, R. Farr and B. McCarthy
Full
Document - pdf (684Kb)
- Test Strategy for Aero-engine Structural Dynamic Model Validation
(ISMA 06)
by J. V. Garcia and D. J. Ewins
Full Document
- pdf (684Kb)
- Automated Mixed Dimensional Modelling for the Finite Element Analysis of
Sketch Based CAD Components
(SPM06)
by T. T. Robinson, C. G. Armstrong, G. McSparron, H. Ou & R. M. McKeag
Full Document
- pdf (684Kb)
- Streamlining the Formation of Virtual Enterprises in the Aerospace Industry
(ICE 2006)
By R.Farr, D. Buxton and B.MacCarthy
Full Document
- pdf (684Kb)
- Advanced Gas Turbine Engine Performance Simulations (ASME Turbo Expo 2007)
http://store.asme.org/category.asp?catalog%5Fname=Conference+Papers&category%5Fname=2007+Conferences&Page=1
by A. Alexiou, E.H. Baalbergen, O. Kogenhop, K. Mathioudakis and P. Arendsen
see also http://www.ltt.ntua.gr/papers/GT2007-27086-pre.pdf
- Process Planning by Integrated Design and Evaluation of Technology Chains
using a Standard ERP-System (ASME 2007 IDETC/CIE 2007) paper DETC2007/VIB-34258
(not yet on the ASME website)
http://www.asmeconferences.org/IDETC07/pdfs/FinalProgram.pdf
by G. Reinhart, C. Lau, S. Mueller and H. Uwe-Baron
- Aeromechanical optimization of turbomachinery blade design within the VIVACE
European project (8eme Colloque National et Calcul des Structures, Giens 2007)
by R. Filomeno Coelho and S. Pierret
Full Document - pdf (84Kb)
- PROOSIS - A Collaborative Venture for Gas Turbine performance Simulation
using an Object Oriented Programming Schema (ISABE 2007)
by A. Bala, V. Sethi, E. Lo Gatto, V Pachidis and P. Pilidis
Full Document - pdf (900Kb)
- Parametric Factory Simulation for the Responsive Enterprise (International
Conference on Responsive Manufacturing ICRM 2007)
by R. Farr, J. Tannock and S. Holm
Full Document - pdf (250Kb)
- The Use of Modelling and Simulation in the Design of a Service Support
System for Aircraft Engines. (to be submitted as a journal article)
by J-P Li and G Thompson
Full Document - pdf (200Kb)
- Aerospace Structural Dynamics (NAFEMS Conference, September 2007)
by J. Garcia
Full Document - pdf (4.9Mb)
- Simulation-based Reliability Assessment of Services in the Context of Functional
Products. (to be submitted as a journal article)
by J-P Li and G Thompson
Full Document - pdf (270Kb)
- Secondary Air System Component Modelling for Engine Performance Simulations.
(accepted for ASME Turbo Expo 2008, Berlin June 9-13, 2008, paper number GT2008-50771)
by A. Alexiou and K. Mathioudakis
- Advanced Modelling of Fluid Thermodynamic properties for Gas turbine Performance
Simulation. (accepted for ASME Turbo Expo 2008, Berlin June 9-13, 2008, paper
number GT2008-51126)
by V.Sethi, F. Diara, S. Atabak, A. Jackson, A. Bala and P. Pilidis
- Recent Advances in CAD/CAE Technologies for Thin-Walled Structures Design
and Analysis. (to be presented at the Fifth International Conference on Thin-Walled
Structures in Brisbane, Australia, June 2008)
by C.Armstrong, T. Robinson and H.Ou
Full Document - pdf (1.8Mb)
|
|
